30mm Metal LED Tact Switches with IP67 Rating
The 30mm Metal LED Tact Switches series is an internal waterproof light-touch switch. Its short size is suitable for use in narrow spaces. It has a single-color/two-color/three-color common pole with light function, and can be wired with plugs. This momentory tact switch's operating ambient temperature range is from -20 ° C to 85 ° C , and with IP67 rating which suitable for a variety of different conditions.
The distinctive feature is the double action of the double throw switch; It will actuates when press mid-travel and , then continue pressing for another actuation at full travel. This Metal T act Switches also offer a nice tactile response which allow this series Tactile Push Button Switches to be used across a wide variety of applications and operating conditions. The applications is Medical equipment, Industrial control instruments and Computer.
SPECIFICATIONS
Panel Thickness: Ø30.20mm
Function:Momentary
Contact Rating: 50mA @ 12VDC.
Mechanical Life: 200,000 cycles
Contact Resistance: 50 m Ω max.
Insulation Resistance: 100M Ω min.
Operating Temperature: -20 ° C to 85 ° C
Electrical Life: 50,000 cycles make-and-break cycles.
Torque: 1~3Nm
Travel: About 0.3mm
Operation Pressure: About 1.5N
Dielectric Strength: 500 Vrms @sea level.
Ingress Protection: IP67
MATERIALS
BUSHING : Stainless Steel / Nickel plated brass / Aluminum alloy
BASE : PBT, PC
ACTUATOR : PC ; Stainless Steel / Nickel plated brass / Aluminum alloy
INNER ASSEMBLY : POM / PA66.
SPRING : Spring steel.
SEALING : Sillicone.
O-Ring : Sillicone
TERMINAL : Brass,with silver or gold plated.
HEX NUT : Nickel plated brass
Led: 1.8V/3V/6V/12V/24V/36V/48V/110V/220V
ILLUMINATION BASE RATlNG ：
Red ， Yellow and Orange ： 20mA 1.8V;
Blue, Green and White ： 20mA 2.8V
Beads Color ： R/U/G/Y/0/W/RGB
Keuntungan kita
Dari pembelian bahan baku hingga produk jadi, semua proses produksi (pengembangan produk/pelapisan/cetakan dan pemrosesan peralatan/penentuan logam/plastisireksi plastis/semi-otomatis dan perakitan peralatan otomatis sepenuhnya, dll.) Diselesaikan di pabrik. Penekanan logam dan injeksi plastik kami memiliki keuntungan 100% cetakan buatan sendiri, dari satu bentuk ke berbagai bentuk aplikasi. Dan kami terus -menerus menjaga inovasi dan meningkatkan teknologi untuk berkolaborasi dengan pelanggan kami untuk merancang produk yang paling canggih. Yeswitch Electronics Co., Ltd., whether in production base or in quality assurance department in the head office, have professional equipment and technical personnel. Selain pengembangan produk baru tahunan, peningkatan dan pengujian produk dilakukan sebagai rencana tahunan untuk memastikan bahwa produk yang terdaftar mempertahankan kualitas terbaik. Oleh karena itu, pelanggan/mitra jangka panjang kami, dapatkan kualitas sakelar terbaik .
Order Procedure
Production Procedure
Contact Now
